[Homebrewers] NCHF - Keg info Request/Banner

[Seeley, Steve E]

You got nitrogen?  I believe Pat has put the female side (barb fitting)
of spin on connectors on the beers lines.  This will avoid the
constantly shrinking line problem that is caused by cutting the fittings
off each time we need to change them.

Can you bring spin on connectors (minus the female barb portion)?  Gas
doesn't matter as long as most people bring their own gas (that sounds
scary!). 

>-----Original Message-----
>From: Frenn, Michael [mailto:MFrenn at SolanoCounty.com] 
>Sent: Tuesday, October 03, 2006 12:03 PM
>To: Seeley, Steve E; homebrewers at hazeclub.org
>Subject: RE: [Homebrewers] NCHF - Keg info Request/Banner
>
>If you don't want the water carbonated, push with nitrogen
>
>M
>
>PS  I will be bringing bottles and kegs, but right now I may be
>obligated to hoppy hour.  In any event, I will have all necessary
>hardware and gas if I have anything available
>
>-----Original Message-----
>From: homebrewers-bounces at hazeclub.org
>[mailto:homebrewers-bounces at hazeclub.org] On Behalf Of Seeley, Steve E
>Sent: Tuesday, October 03, 2006 11:51 AM
>To: homebrewers at hazeclub.org
>Subject: Re: [Homebrewers] NCHF - Keg info Request/Banner
>
>Hi Pat,
>
>	Doesn't look like your getting the information you were
>requesting.  Let me be the example:
>I'm bring my PreProPils and the clubs RIS.  Both are in pin-lock kegs.
>I'll bring spin on/threaded liquid quick disconnects for hookup to the
>chillers.  I'll also bring a pin-lock water keg with spin on 
>disconnect.
>I'll bring my CO2 tank that has 3 pin-lock and 1 ball-lock gas quick
>disconnects.  The gas pin-locks will be consumed to cover the 2 beers
>and water but the ball-lock should be free.  I believe this is the kind
>of information your looking for?
>
>Steve
>
>>Date: Mon, 2 Oct 2006 14:06:52 -0700 (PDT)
>>From: Pat Kennealy <p_kennealy at yahoo.com>
>>Subject: [Homebrewers] NCHF - Keg info Request/Banner
>>
>>Hello All,
>>
>>In prepping the trailer it would be helpful to know
>>the following from everyone:
>>
>>If Bringing kegs, how many and what type (Pin Vs Ball)
>>Bringing Co2 and connector for each?
>>
>>Does anyone know where the HAZE banner is? We need it
>>for the booth.
>>
>>I am heading up Friday and coming back Sunday, if
>>someone needs a ride.
>>
>>Pat
>