[Homebrewers] Hey, welders

[Pat Kennealy]

Is that similar to the FlUx Kored Arc Wire Feed ??  ;-)
 


--- On Fri, 8/29/08, Bill & Pati Kenney <kenneys at pacbell.net> wrote:

From: Bill & Pati Kenney <kenneys at pacbell.net>
Subject: Re: [Homebrewers] Hey, welders
To: "Frenn, Michael" <MFrenn at SolanoCounty.com>, homebrewers at hazeclub.org
Date: Friday, August 29, 2008, 4:12 PM


 



It is FCAW - flux cored arc welding (wire feed).  It can be used in place of GMAW - gas metal arc welding (used to be MIG - metallic inert gas).  It just does without the inert gas (Argon usually).  If you have a wire feed arc welder you can use either.  
 
Bill

----- Original Message ----- 
From: Frenn, Michael 
To: homebrewers at hazeclub.org 
Sent: Friday, August 29, 2008 3:06 PM
Subject: [Homebrewers] Hey, welders


PraxAir is coming out with a fluxed stainless wire so you don't need gas. Anyone know about this?
Mobileberry



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://hazeclub.org/pipermail/homebrewers_hazeclub.org/attachments/20080829/73492198/attachment.html